Master Equipment Rep Electric Lift for Pro Equipment

Update your dog washing station. This Master Equipment Replacement Electric Lift Mechanism is compatible with: Master Equipment Superior Stainless Electric Tables (TP8657) Master Equipment Z-Lift II Electric Tables (TP8639) Master Equipment Flex Electric Tables (TP074) Master Equipment Electric Grooming Tables with Remote Control Lifts (TP7000) Master Equipment Bone-Shaped Electric Tables (TP0129) Master Equipment Electric Ease Grooming Table(TP1080) Master Equipment PolyPro Lift Grooming Tubs (TP5856) Includes one Replacement Electric Lift Mechanism. This electric lift mechanism is not compatible with the Master Equipment X-Tend Electric Grooming Tables (TP7144), Master Equipment Origin Electric Table (TP1515), or Master Equipment Electric Table (TP15140). Material: Polypropylene, metal Dimensions: 14¼" x 7¾" x 4" Instructions to Replace Electric Lift Mechanism - Tools needed: Philips-Head Screwdriver, Hammer or Mallet Using a philips-head screwdriver, loosen the screws from the electrical control box cover. Remove the cover. Unplug the cord that connects the electrical control box to the electric lift mechanism. Use a philips-head screwdriver to pull out the snap rings from the locking pins on the electric lift mechanism. Use a hammer or mallet to tap out the two locking pins from the base and tip of the electric lift mechanism. Remove the old electric lift mechanism. Insert the new electric lift mechanism into the grooming facility. Insert one of the locking pins into the attachment hole at the top of the electric lift shaft and rotate counterclockwise to extend, until the tip reaches the mounting brackets on the table frame. Remove the locking pin, slide the top of the electric lift shaft into place between the mounting brackets, and reinsert the locking pin through the mounting brackets and the top of the electric lift shaft. Slide the other locking pin through the mounting brackets at the base of the electric lift mechanism. Using a hammer, knock both locking pins into place. Replace the snap rings to secure the locking pins. Slide the cord from the new electric lift mechanism through the rubber gasket on the electrical control box. Plug the cord from the new electric lift mechanism into the correct port on the electrical control box. Place the cover back onto the electrical control box. Using a philips-head screwdriver, replace the screws and tighten to secure in place. Download Instructions (PDF File)